Site ready, Plug & hydrate
A sustainable bulk drinking water solution for worksites, Aquapax 1000L Water Pods, are a simple and effective solution to access pure Perth spring water on any remote or local worksite. The 1000L Water Pods eliminate the need for expensive filtration systems, unhygienic water tanks, and masses of plastic bottles, all while helping your company move closer to carbon-neutral status.
The Aquapax 1000L Water Pods can work as a single pod or as a modular and scalable bulk drinking water solution. Link multiple 1000L Water Pods together for a low-cost high-quality bulk drinking water solution capable of supplying an entire remote site.
About the Aquapax 1000L Water Pod
The Aquapax 1000L Water Pod is 1000L of safe, pristine Perth spring water, easily transportable to any location. They weigh 1000kg and come on a standard 1165×1165 non-returnable pallet, which means logistics, transport and storage don’t require any special handling options. Our proprietary packaging technology protects the water from direct air contact and sunlight, keeping pollutants at bay. We guarantee it to be safe drinking water for two years.
The 1000L Water Pod is tough enough to sit outside exposed to the elements, it can be directly connected to our drinking station to chill and dispense icy-cold water for consumption. It’s the perfect supply for filling coolers and water bottles or alternatively, it can be pumped into a crib room or other site structure. The 1000L Water Pod is a modular component that can be used as part of a complete on-site safe bulk drinking water solution. The single-use system means there is no need for two-way shipping and the associated expense, this reduces your project’s carbon footprint and saves a truckload of work.
How Water Pods Work
Step 1 - Uncover the Nozzle
Slice the clear film and peel it back to uncover the nozzle. Cut the cable ties off and remove the cap to have full access to the tap.
Step 2 - Screw in an adaptor fitting
The valve outlet is a 20mm (3/4 inch) female BSP thread. Using the appropriate fitting for your application, apply a few laps of thread seal tape and screw the fitting in place.
Step 3 - Attach Hose
Attach the appropriate hose or pipework for your application, ensuring a tight fit.
Step 4 - Link to Pump
The pod can then be linked to a constant-pressure drinking water pump. Or, to one of our Rehydration Stations that has an inbuilt pump.
Step 5 - Link to Multiple Pods
By creating a simple manifold, multiple pods can be linked together.
Step 6 - Supply Water
Just like a water tank, once connected the pods can supply water to a variety of appliances such as water coolers and ice machines.
Step 7 - Adapt to large scale systems
Water pods can be adapted to a variety of large-scale bulk drinking water systems.
how much water does your site need?
Use our Water Consumption Calculator to determine approximately how much drinking water your site requires.
This calculation is based on Australian Dietary Guidelines, which recommends 2.6L of water per day for the average person.
Based on Australian Dietary Guidelines, you will need approximately:
Get in touch
We'll solve your water needs with Australia's freshest spring water!
